Whitehall Glass

Glass splashbacks and tiles

Splashbacks for kitchens and bathrooms


Tiles and splashbacks are supplied in normal, patterned or kilned glass. Kilned glass is standard glass heated to a high-temperature and left to the cool slowly over a textured mould. This gives a fascinating crinkly or textured effect which we can heighten with a two colour finish.

As we make everything to order, just specify the size of splash backs panels and tiles. Our glass can be finished in virtually any colour and we prefer our customers to send a colour swatch for us to match.


We use 6 mm toughened glass for all splash backs and for tiles sizes down to 250 mm glass below this size will not be toughened.

Splashbacks sizing

If the glass is rectangular or square just advise the measurements. If not send a template or drawing, please remember that the glass industry tolerance is usually plus or minus 2mm but we are normally able to manufacture between plus or minus 1mm.

We can allow for cutouts for sockets : single socket size is 75 mm by 75 mm double sockets size is 75 mm by 135 mm. Each sockets must be at least 50 mm from the edge of the glass we will need the exact position. As the glass is toughened it can not be cut on-site.

Tiles sizes

Our standard sizes are 10 cm x 10 cm, 15 cm x15 cm, 25 cm x 25 cm and 30 cm x 30 cm. Tiles can be made to any size for a minimum order of at least one square metre.


All edges will be polished except for kilned glass which achieves its own smooth edge in the kilning process. Our prices range from £165 per sq m for splashbacks and panels made from standard float glass. This includes painting to any colour of your choice, polished edges and toughening. Prices for kilned glass and optiwhite glass range from £220 per sq m. All prices are plus VAT and delivery.

Glass cut to non-rectangular shape may be subject to an additional charge dependent on complexity. For a quotation complete the form or telephone us on 01953 483200